Embroidery pattern selection of hot glue thickness standard:

0.11MM Any two kinds of cloths, then, because of the height of the warp and weft yarns, the standard is next to the hot glue, the thickness needs to be above 0.1MM, unless the one of the adjacent paper is flat, otherwise the thickness is less than 0.1mm. Focus will be a crisis, 0.1MM is suitable for small patterns or armbands, easy to cut, but if the pattern is more than 2 inches of pattern or armband, it should not be used.

0.12MM is suitable for patterns above 1 inch or thicker lines, the colloid is moderately soft and hard, and then the quality is good.

0.15MM is suitable for electric embroidery patterns or armbands, more than 2 inches and larger patterns, more suitable for all kinds of thick cloth processing, and then strong